CJJHR - 670300 934300 PRIME & BOND 2.1 UNIVERSAL LIGHT-CURED DENTAL
- MSDS: CJJHR
- Manufacturer: CAULK DENTSPLY
- Product Name: 670300 934300 PRIME & BOND 2.1 UNIVERSAL LIGHT-CURED DENTAL
- National Stock Number: 6520-01-341-4560
Product Identification
Product ID:670300 934300 PRIME & BOND 2.1 UNIVERSAL LIGHT-CURED DENTAL
MSDS Date:10/07/1996
FSC:6520
NIIN:01-341-4560
Status Code:A
MSDS Number: CJJHR
Responsible Party
MILFORD, DE 19963-0359
US
Emergency Phone: 302-422-4511
Info Phone: 302-422-4511
Cage: 11107
Contractor
Telephone: 302-422-4511/ 703-451-1900
Cage: 11107
Ingredients
ACETONE
CAS: 67-64-1
RTECS: AL3150000
OSHA PEL 2400 MG/M3;1000 PPM
ACGIH TLV: 1780 MG/M3;750 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
METHACRYLATES
Hazards
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: MAY CAUSE IRRITATION & POSSIBLE
CORNEAL DAMAGE. INDIVIDUALS SENSITIVE TO METHACRYLATES MAY DEVELOP
ALLERGIC RESPONSE. SKIN: DERMAL IRRITATION/POSSIBLE ALLERGIC
REACTION.
Effects of Overexposure:IRRITATION, NAUSEA
Medical Cond Aggravated by Exposure:OPEN SORES/WOUNDS ON SKIN. KNOWN
SENSITIVITY TO ACRYLICS.
First Aid
First Aid:SKIN: IMMEDIATELY WASH W/PLENTY OF SOAP & WATER. EYES: FLUSH
W/WATER FOR 15 MINS. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point:=-19.C, -2.2F
Lower Limits:2.5
Upper Limits:13
Extinguishing Media:CO2, DRY CHEMICAL, WATER FOG, FOAM
Fire Fighting Procedures:WEAR MSHA/NIOSH APPROVED, PRESSURE DEMAND,
SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:KEEP AWAY FROM FIRE.
Accidental Release
Spill Release Procedures:ABSORB W/INERT MATERIALS SUCH AS
VERMICULITE/DRY SAND THEN PLACE IN AN APPROPRIATE CONTAINER FOR
DISPOSAL.
Handling
Handling and Storage Precautions:STORE AWAY FROM OXIDIZING AGENTS SUCH
AS PEROXIDES. STORE AWAY FROM FOOD. AVOID PROLONGED EXPOSURE ABOVE
100F.
Exposure Controls
Respiratory Protection:USE SELF CONTAINED BREATHING APPARATUS DURING
HIGH VAPOR CONCENTRATIONS.
Ventilation:LOCAL EXHAUST IS RECOMMENDED. MECHANICAL VENTILATION USING
EXPLOSION-PROOF MOTORS IS ACCEPTABLE.
Protective Gloves:LATEX/RUBBER
Eye Protection:SAFETY GOGGLES
Other Protective Equipment:EYE WASH, SAFETY SHOWER
Work Hygienic Practices:OBSERVE NORMAL CARE WHEN WORKING W/CHEMICALS.
Supplemental Safety and Health
Chemical Properties
Boiling Pt:B.P. Text:131-132.8F
Melt/Freeze Pt:=-95.C, -139.F
Vapor Pres:233
Spec Gravity:0.79
Solubility in Water:COMPLETE
Appearance and Odor:LIGHT YELLOW LIQUID W/ACETONE ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDANTS, ALKALI METALS, HALOGENS
Stability Condition to Avoid:VISIBLE LIGHT, HIGH TEMPERATURE, HUMIDITY
Hazardous Decomposition Products:METHACRYLATES, ACRYLATES, IRRITANT
GASSES
Conditions to Avoid Polymerization:LIGHT, TEMPERATURE
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.